Krajnji mlin za kukuruz

 

1. Hard alloy material: This Corn End Mill is made of hard alloy material, which has excellent hardness and wear resistance. This makes the tool stable in the cutting process and can achieve efficient cutting on different materials.

 

2. Surface coating treatment: Its surface is coated to provide additional strength and stress dispersion. This treatment not only protects the tool surface from wear, but also enhances its service life.

 

3. Unique shape: The cutter has a unique corn tooth shape, in which the cutting edge has serrations. This design is helpful to break chips and reduce the accumulation problem in cutting process, thus improving machining efficiency.

 

4. Suitable for rough machining: Due to the serrated tooth shape and special design of the tool, it will leave traces on the surface of the workpiece, which will provide convenience for subsequent treatment, so it is suitable for rough machining of difficult-to-machine materials.

 

5. Change the vibration characteristics: Its tooth structure can change the vibration characteristics, usually moving the frequency out of the key area of flutter. This is helpful to improve the stability of the tool and make the machining process more stable.

 

 

 

 

 

 

 

 

	d1	L1	D	L
D3.175*12*D3.175*38L	3.175mm	12mm	3.175mm	38L
D3.175*17*D3.175*38L	3.175mm	17mm	3.175mm	38L
D3.175*22*D3.175*45L	3.175mm	22mm	3.175mm	45L
D3.175*25*D3.175*45L	3.175mm	25mm	3.175mm	45L
D4*17*D4*50L	4mm	17mm	4mm	50L
D4*22*D4*50L	4mm	22mm	4mm	50L
D4*25*D4*50L	4mm	25mm	4mm	50L
D4*32*D4*60L	4mm	32mm	4mm	60L
D6*17*D6*50L	6mm	17mm	6mm	50L
D6*22*D6*50L	6mm	22mm	6mm	50L
D6*25*D6*50L	6mm	25mm	6mm	50L
D6*32*D6*60L	6mm	32mm	6mm	60L
D6*42*D6*70L	6mm	42mm	6mm	70L
D6*52*D6*80L	6mm	52mm	6mm	80L
D6*62*D6*90L	6mm	62mm	6mm	90L
D8*25*D8*60L	8mm	25mm	8mm	60L
D8*32*D8*60L	8mm	32mm	8mm	60L
D8*42*D8*70L	8mm	42mm	8mm	70L
D8*52*D8*80L	8mm	52mm	8mm	80L
D8*62*D8*90L	8mm	62mm	8mm	90L
D10*32*D10*75L	10mm	32mm	10mm	75L
D10*42*D10*85L	10mm	42mm	10mm	85L
D10*62*D10*95L	10mm	62mm	10mm	95L

 

Φ1.0-Φ2.9	0--0.02	H6
Φ3-Φ6	-0.01--0.03
Φ6-Φ10	-0.01--0.035
Φ10.0-Φ18.0	-0.01--0.04
Φ18.0-Φ20.0	-0.015--0.045

 

		50HRC	55HRC	60HRC	65HRC
○	○	√	√	√		○	○

 

 

 

					Density(g/cm3)		T.R.S(N/mm2)
YG10X(50HRC)	K30-K40	89	10	0.8	14.43	91.5	2500
UF12U(55HRC)	K40	87	12	0.6	14.15	92.3	3900
AF501(60HRC)	K05-K10	89	10	0.4	14.1	92.8	3600
AF308(65HRC)	K05-K10	91	8	0.3	14	93.8	3800

 

 

 

 

 

1. Good knowledge on different market can meet special requirements.

2. Real manufacturer

3. Strong professional technical team ensure to produce the top quality products.

4. Special cost control system ensure to provide the most favorable price.

5. Rich experience equipment.

 

 

 

 

 

1.Q: When we receive your machine ,is there any other Accessories we will get?

 

2.Q: Can your products be customized?

 

3.Q: What's your after-sale service?

 

4. Q: How long is the production cycle?

A: 30-50 days

 

5.Q: What are your terms of payment?

 

Popularni tagovi: , Glodala od tvrdog metala za drvo, Kompresijsko glodalo, Krajnji mlin za kukuruz, Glodala s ravnim žljebovima, Glodala za graviranje ravnih žljebova